成都中凿采掘机械有限公司
成都中凿采掘机械有限公司 入驻平台 第15
  • 资质核验已核验企业营业执照
  • 真实性核验企业已实名认证
  • 资质核验已核验企业营业执照
  • 真实性核验企业已实名认证
当前位置:
首页>
供应产品>
金科JK593G光伏钻机 2023年光伏桩基钻孔行情 双回转马达大扭矩钻车
微信联系
扫一扫
添加商家微信
联系方式 在线联系

金科JK593G光伏钻机 2023年光伏桩基钻孔行情 双回转马达大扭矩钻车

JK593G履带式液压潜孔钻机主要用于光伏发电站桩基钻水电工程,露天采矿,道路修建,***工程的钻凿孔作业。

价    格

订货量

  • 28.89万

    1 - 2

  • 27.8万

    3 - 4

  • 27.33万 价格为商家提供的参考价,请通过"获取最低报价"
    获得您最满意的心理价位~

    ≥5

刘先生
邮箱已验证
手机已验证
微信已验证
𐁕𐁖𐁗 𐁘𐁕𐁘𐁘 𐁗𐁙𐁚𐁗 𐁛𐁜𐁘𐁝𐁘𐁙𐁚𐁙𐁞𐁖𐁞𐁜
微信在线
  • 发货地:四川 成都
  • 发货期限:10天内发货
  • 供货总量: 10台
成都中凿采掘机械有限公司 入驻平台 第15
  • 资质核验已核验企业营业执照
  • 真实性核验企业已实名认证
  • 刘先生
    邮箱已验证
    手机已验证
    微信已验证
  • 𐁕𐁖𐁗 𐁘𐁕𐁘𐁘 𐁗𐁙𐁚𐁗
  • 微信交谈
    扫一扫 微信联系
  • 四川 成都
  • 液压潜孔钻机,锚固管棚钻机,移动螺杆式空压机,冲击器钻头

联系方式

  • 联系人:
    刘先生
  • 职   位:
    总经理
  • 电   话:
    𐁛𐁜𐁘𐁝𐁘𐁙𐁚𐁙𐁞𐁖𐁞𐁜
  • 手   机:
    𐁕𐁖𐁗𐁘𐁕𐁘𐁘𐁗𐁙𐁚𐁗
  • 地   址:
    四川 成都 金牛区 四川省成都市金牛区量力机电城8栋104号
品牌:金科动力头转速:160rpm回转速度:80m
可配钻杆类型:89爬坡能力:30°外形尺寸:7000cm
行走速度:3km/h型号:JK593G光伏钻机桩工机械种类:微型桩
钻孔深度:50m钻孔直径:400mm最大扭距:6500kn.m
产品类型:潜孔钻机用途范围:光伏桩孔,爆破孔额定功率:73.5
工程机械种类:潜孔钻机重量:7200最大切深:50

金科JK593G光伏钻机 2023年光伏桩基钻孔行情 双回转马达大扭矩钻车详细介绍

JK593G爆破光伏钻孔履带式多功能钻机


JK593G爆破光伏钻孔履带式多功能钻机,结构优化,进尺,设计更人性化。采用柴油发动机一液压油泵组为动力装置,由液压马达实现钻机回转、推进、提升、行走及液压油缸摆角定位等辅助动作。

JK593G履带式液压潜孔钻机主要用于光伏、水电工程,露天采矿,道路修建,工程的钻凿爆破孔作业。

JK593G is a dual - purpose driling rig for blasting holes and photovoltaic holes . The structure is fuly optimized , the footage cost is lower , and the design is more user - friendly . The diesel engine - hydraulic oil pump set is used as the power device , and the auxiliary actions of the driling rig such as rotation , feeding , lifting , walking and hydraulic cylinder swing angle positioning are realized by the hydraulic motor .

JK593G crawler mounted hydraulic down - the - hole driling rig is mainly used for driling and blasting holes in photovoltaic , hydropower projects , open - pit mining ,Г oad construction , and national defense projects .

01、回转机 Rotation unit

型回转箱体,双马达回转,回转扭矩更大,且可实现回转速度双速调节,设有转速切换,两档转速快速切换,以便钻机适用不同工况。带减震器接头,运行更平稳,故障率,降低了日常维护松散层不易卡钻,成孔。

进口回转密封件,密封性好、寿命长。

The reinforced rotation unit has dual motors , which brings greater rotation torque and can realize two - speed adjustment of rotation speed . Equipped with a speed switching valve , the two - speed speed can be quickly switched , so that the drilling rig can be used in different working conditions . With a shock absorber joint , the operation is more stable , the failure rate is lower , and the daily maintenance cost is reduced , besides , the loose layer is not easy to get stuck so as to realize higher hole formation rate .

Imported rotary seals have good sealing performance and long service life .


02动力装置 Power train

进口液压油泵、液压,耐压高,排量大,质量,寿命长。

潍柴74KW增压发动机,柴油机配置满足阶段排放标准。动力强劲,易维护保养。

两级空气滤清装置,确保发动机吸入洁净空气,。

油水一体散热器,在高温环境下,发动机和液压系统正常工作。

Imported hydraulic oil pump has high pressure resistance , large displacement , more reliable quality and long life .

Weichai 74KW engine configuration meets Phase Ill emission standards , it is powerful and easy to maintain .

The two - stage air filter device ensures that the engine sucks in clean air , which is safe and reliable .

The oil - water integrated radiator ensures the normal operation of the engine and hydraulic system in a high temperature environment .

03、免维护推进机构 Maintenance - free feed mechanism

液压机械双重锁定,液压马达的大扭矩稳定输出,自动机械锁定,防止下滑,二者结合,使用寿命长。

技术更,不需要日常油维护。

The hydraulic and mechanical double lock not only ensures the stable output of the large torque of the hydraulic motor , but also greatly imp Г oves the service life than the worm and gear . The mechanical lock also prevents hydraulic leakage and prevents sliding . The combination of the two , each takes its own strengths .

The technology is more advanced which does not require daily refueling and maintenance .

04操纵台 Control panel

操纵集中布置,便于钻机的各项操作控制。液压操作系统,,操作简单,维护低。视野更宽,操纵更安全,适合工地的不同使用情况,设计更加安全化、人性化。

快速推进及提升操作,减少辅助时间,提。推进力大小可根据钻进需要随时调节。

The control valves are centraly arranged to facilitate the operation and control of the drilling rig . Hydraulic operating system , reliable performance , simple operation and low maintenance cost . Wider field of vision , safer manipulation , suitable for different use situations on the construction ste , and more secure and user - friendly design .

Quickly feeding and lifting operations , reduce auxiliary time and improve efficiency . The feeding force can be adjusted at any time according to the drilling needs .


05底盘系统Maintenance - free undercarriage

加长底盘,重心降低,稳定性好。

大扭矩行走马达,爬坡能力强,行走速度快,同时配有双速行走系统,节省移位时间。

装配行走平衡系统,履帯架前后浮动各10,适于崎岖现场施工。

免维护四轮一带,无需注油。

加装履带护板,防止履带**。

加装双钻杆库和大操作站立平台。

Lengthened chassis , lower center of gravity and better stability .

The high - torque walking motor has strong climbing ability and fast walking speed , and is equipped with a two - speed walking system to save shifting time .

Equipped with a walking balance system , the crawler frame floats 10° forward and backward , which is suitable for rough site construction .

Maintenance - free four - wheel belt , no need to fil

Oil . Instal track guards to prevent track derailment . A double dril rod carousel and a large operating standing platform are installed .


06滑架系统 Feeding system

型滑架,双外翻式加工导轨,导轨厚、精度高,推进、提升及滑架补偿更稳定。

一体式钻臂支座,强度高,钻臂稳定性好,维修便捷。多角度、加长型功能钻臂,钻孔范围更广,比同类钻机钻孔工作扇形面积多20%。

滑架及钻臂稳定性好,能压得住,适合光伏大孔作业

Reinforced feed , with double valgus processing wear - resistant guide rail , which is thick and with high precision , can bring more stable performance of feeding , lifting and extension .

The integrated boom support has high strength , good boom stability and convenient maintenance .

Multi - angle , lengthened functional dril arm have wider drilling range ,20% more fan - shaped area than similar drilling rigs .


07、电控系统 Electronic control system

电控系统采用进口元,品质可靠,故障率低。

发动机的工作运行参数、提示、报警功能集中在仪表上,便于操作者观察,各项数据一目了然。

可选配角度仪,钻机的开孔角度实时显示,方便操作者准确布孔,掌控全局。

The electronic control system adopts imported compo -nents , with reliable quality and low failure rate .

The operating parameters , prompts and alarm functions of the engine are concentrated on the instrument , which is conve - nient for the operator to observe and makes the data clear at a glance .

Inclinometer is optional . The driling angle of the driling rig is displayed in real time , which is convenient for the operator to arrange holes accurately and control the overall situation .


JK593G爆破光伏多功能钻机技术参数/Technical Specications

钻孔直径Hole diameter

φ90 -φ300mm

钻杆长度Rod-changing length

3m

适应岩石硬度Applicable rock hardness

f=6-20

工作风压Working air presure

1.2-2.5MPa

滑架行程Feeding stroke

4138mm

水平凿岩高度 horizontal dilling height

3370mm

回转速度Rotation rate

0-110rpm

回转扭矩Rotation torque

4200Nm

行走速度Walking speed

2.2Km/h、 3.6Km/h

爬坡能力Grade ability30°

/td>

30°

动力Power潍柴Yuchai

74KW

全液压干式Hydraulic dry type dust collector

除尘器(选配) Dust collector (optional)

湿式除尘Wet type dust collector

外形尺寸Dimension (LWH)

7000x 2400x 2700mm

整机重量Weight

7500kg









免责声明:
本页面所展现的公司信息、产品信息及其他相关信息,均来源于其对应的商铺,信息的真实性、准确性和合法性由该信息来源商铺的所属发布者完全负责,供应商网对此不承担任何保证责任。
友情提醒:
建议您在购买相关产品前务必确认供应商资质及产品质量,过低的价格有可能是虚假信息,请谨慎对待,谨防欺诈行为。
 
建议您在搜索产品时,优先选择带有标识的会员,该为供应商网VIP会员标识,信誉度更高。

版权所有 供应商网(www.gys.cn)

京ICP备2023035610号-2

成都中凿采掘机械有限公司 手机:𐁕𐁖𐁗𐁘𐁕𐁘𐁘𐁗𐁙𐁚𐁗 电话:𐁛𐁜𐁘𐁝𐁘𐁙𐁚𐁙𐁞𐁖𐁞𐁜 地址:四川 成都 金牛区 四川省成都市金牛区量力机电城8栋104号